SKIP TO CONTENT

Category: Uncategorized

Contact NASF

P: (202) 457-8404
| info@NASF.org

Media Contact

Jean Marie Saidler
| NASF Media Relations Director
(815) 459-3915
| media@NASF.org

NASF Report

NASF has partnered with Products Finishing to present "The NASF Report" a periodical resource for information about NASF and the surface finishing industry.

Click Here to Read the Report

Categories

Archives

Category: Uncategorized

NASF Report

NASF has partnered with Products Finishing to present "The NASF Report" a periodical resource for information about NASF and the surface finishing industry.

Click Here to Read the Report

Categories

Archives

Register Today for SUR/FIN Atlanta – Sessions Begin at 8:30 AM on Monday, June 19, 2017

POSTED: March 30, 2017

The NASF SUR/FIN® Manufacturing & Technology Trade Show & Conference has expanded and is shaping up to be the event you can’t afford to miss. Because the 2017 event has so much to offer, the conference program will now begin at 8:30 AM on Monday, June 19. This is a departure from recent years when the conference program kicked off in the afternoon. The new schedule allows attendees to take advantage of the full range of conference sessions without sacrificing time on the show floor.

The conference program can be viewed at NASFsurfin.com. In addition to the key session offerings such as Advances in Surface Finishing and Automotive and Technical Responses to REACh, there will also be sessions on Aerospace & Defense, Technology for Increasing Performance, and more. Attendees and exhibitors will have a total of 14 sessions from which to choose, plus complimentary sessions such as the Sustainability Summit, Nadcap and keynote presentations from Executive Director of the Automotive Industry Action Group J. Scot Sharland and Scott Fetter with the F-35 Joint Strike Fighter program at Lockheed Martin.

More than 180 companies will showcase the latest equipment, supplies and services in more than 100 product categories. SUR/FIN exhibitors will provide their expertise in surface technology to make your company more efficient and profitable. Looking for a particular product or service from our exhibitors? You’ll find it here.

Registration is now open at www.nasfsurfin.com.



CATEGORIES: Education, Events, International, NASF Chapters, NASF Members, New Members, Uncategorized


NASF Finalizing Metals Discharge Study: Presentation to EPA at April Washington Forum

POSTED: March 30, 2017

The NASF through its Government Advisory Committee is nearing completion of a milestone review and case study of the industry’s progress in reducing wastewater discharges throughout a nearly 30-year period. The study compares metals discharged by permitted finishing operations in Milwaukee from 1989 to 2016. It evaluates total metals reductions from companies to the municipal treatment plant, average reductions on a per facility basis, and the relative contribution of the finishing industry versus the larger universe of industrial dischargers in the community.

The draft version is under review by the committee this month and, as anticipated, preliminary findings show the industry’s reductions to be significant. The results of the study will be presented at the NASF Washington Forum in a discussion led by GAC Committee Member John Lindstedt, Advanced Plating Technology. Committee representatives will also present the study’s findings to the U.S. Environmental Protection Agency during the April meetings. The findings will substantiate the association’s position that protecting the nation’s waterways has been an overwhelming success, and that future, more stringent discharge standards are unnecessary.

Further details will be available shortly after the committee’s review and the report is finalized.



CATEGORIES: Government Relations, Law & Regulation, NASF Members, Other Publications, Research, Uncategorized


Regulatory Alert: California Targeting Finishing Air Emissions Below Nanogram Levels

POSTED: March 30, 2017

Prompted by concerns over elevated air monitoring levels of hexavalent chromium in a southern California neighborhood, the South Coast Air Quality Management District (SCAQMD) is expected to propose revisions to its Rule 1469 – Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations and Rule 1426 – Emissions from Metal Finishing Operations.

Local air officials have indicated that hexavalent chromium levels of more than 0.2 nanograms per cubic meter would pose unacceptable risks to human health. AQMD has already required one metal finishing shop to cease operations for exceeding 1 nanogram of hexavalent chromium per cubic meter at air monitors at the property boundary.

Focus is on Fugitive Emissions

The AQMD staff stated that they are concerned primarily about fugitive emissions from plating operations, rather than emissions from stacks, scrubbers and other control devices. To address the fugitive emissions from plating shops, AQMD may add the requirements below to the current rules for chromic anodizing and chrome plating operations.

  • Monitoring on the premises using multiple monitors ($5000 each) with immediate abatement when levels exceed acceptable risk thresholds
  • Total enclosures for plating and anodizing operations
  • Buildings with negative air pressure
  • Controls and/or covers on all tanks that are heated or agitated and may contain hexavalent chromium, including sealer and rinse tanks
  • More stringent controls on abrasive blast cabinets and grinding operations
  • New housekeeping requirements, including:
    • Daily vacuuming of floors with a HEPA vacuum that is emptied in a clean room environment
    • Daily cleaning of flat surfaces and wall
    • Cleaning of roofs two times per month

Expansion to Other Metals

AQMD is also considering applying similar requirements for metal finishing operations pursuant to Rule 1426 to control fugitive emissions of other metals such as cadmium, lead, nickel, zinc and tin.

AQMD has indicated that it expects to issue the proposed rule by July 2017 and finalize it by the end of 2017. The industry is concerned that it may not be technologically or economically feasible to meet the proposed revisions. California state industry leaders and NASF representatives have met with AQMD officials this month. The industry is now in the process of evaluating options to address this significant and precedent-setting challenge to finishing operations in the region and beyond.

To view a summary of the pending regulatory actions from South Coast air regulatory officials, please click here.



CATEGORIES: Government Relations, Law & Regulation, NASF Chapters, NASF National, Uncategorized


NASF Board Approves Changes to Bylaws

POSTED: October 22, 2015

The NASF Board of Directors recently approved revisions to the NASF Bylaws.  The revisions included minor updates that reflected changes in the association’s structure and governance.  If you have any questions regarding the revised NASF Bylaws, please contact Jeff Hannapel at jhannapel@thepolicygroup.com.

Click Here to Download the NASF Bylaws



CATEGORIES: Uncategorized


Michigan Chapter Announces Speakers for 2nd Annual Midwest Seminar

POSTED: August 18, 2015

Registration is now taking place for the 2nd annual Midwest Seminar Sponsored by the Michigan Chapter of NASF. The event, to be held at Boyne Highlands in beautiful Harbor Springs, Michigan, will be held September 24-26, 2015.

Speakers include:

  • Economist Brian Long
  • Business Research Manager David Riley
  • Kim Tress of Chrysler Group and many more.

Visit minasf.org for further details.  Reservation fill quickly and space is limited.
Contact Erin Burns erin@minasf.org. for answers to your questions and to register.



CATEGORIES: NASF Chapters, Uncategorized
TAGS: